K2_Kevin
K2_Kevin

Death Star Wall Panel (Photography)

by
K2_Kevin
K2_Kevin
K2_Kevin
K2_Kevin
|
Image 1 of 4
Death Star Wall Panel (Photography) 3d model
K2_Kevin
K2_Kevin
|
Image 1 of 4
Death Star Wall Panel (Photography) 3d model
2D
3D
Makes
Death Star Wall Panel (Photography) 3d model
Death Star Wall Panel (Photography) 3d model
Death Star Wall Panel (Photography) 3d model
Death Star Wall Panel (Photography) 3d model

Death Star Wall Panel (Photography)

Description I wanted to design a few backgrounds that could be backlit for small model photography. After printing, you can back with a filter material or paper. I ended up using white index cards. The stands should be press fit, but may require a dab of glue depending on your printer.

Models - Descriptions Empire_Wall_Panel-168mm - 168mm wide panel. Empire_Wall_Panel_84mm - 84mm wide panel. Stands Empire_Wall_Stand_168mm - Full length wall stand (Reduce length 24mm if doing a corner, or reduce length to 84mm if doing the 84mm wall). Empire_Wall_Stand_Corner - 24mm Corner for use when joining two walls at 90° My Print Settings:

4 perimeters Models should be printed face down (default of downloaded .stl) 0.20mm Layer height


69 Likes89 DownloadsAugust 15, 2023